Solid wood doors — bulk supply in Lahore

A solid wood door is heavier, stronger and longer-lasting than most engineered doors, and can be repaired and repolished many times. It also costs more and responds to moisture, so timber choice and seasoning matter.

Types and specifications

Common timbers in Lahore include deodar (diyar), kail, shisham, ash and imported softwoods and hardwoods. Each differs in weight, grain, durability and price. Ask the supplier to name the species for every part of the door: frame, stiles, rails and panels. Some doors mix a better wood on visible parts with a cheaper wood inside.

We did not find a published Lahore or Pakistan standard for residential wooden doors to cite here. Write your specification into the order: species, door thickness, panel thickness, finish and hardware.

What each is used for

• Main entrance: solid panelled or carved door with a strong frame and security hardware.
• Bedrooms and lounges: panelled or solid-core doors.
• Bathrooms: solid wood can swell in wet areas; ask about sealing all edges, or consider other materials.
• Exterior back doors: sturdy timber, well sealed against sun and rain.

Quality checks on delivery

1. Species. Compare against the order. Ask the supplier to show you which part is which wood.
2. Seasoning. The door should not feel damp or smell of fresh sap. Ask how the timber was dried.
3. Joints. Corners should be tight, without gaps or filler hiding poor joints.
4. Straightness. Lay the door on a flat surface or sight along the edge for twist or bow.
5. Thickness. Measure against the specification.
6. Knots and cracks. Large loose knots and splits weaken the door.
7. Finish. If pre-polished, check for even coats and sealed edges, including top and bottom.
8. Size. Check each door against its opening in your schedule.

How much you need

Make a door schedule with your architect listing every opening, its size, direction of swing and hardware. Order from the schedule, not by counting rooms. Measure openings after plaster when doors are made to fit.

Bulk-buying tips

• Sample first. Approve one finished door before full production.
• Frames before plaster, doors after flooring and plaster to avoid damage.
• Delivery. Ask for doors wrapped or covered. Do not stack them on wet floors.
• Storage. Store flat or upright on battens, indoors, away from damp walls and direct sun.
• Invoices. Each door's size, species, finish and price listed separately.
• Payment staging. Advance on order, part on delivery, balance after fitting and check.
• Edge sealing. Make sure all six faces are sealed or polished, especially for doors in humid areas.

What affects the price

We do not publish door prices; get written quotes. Price depends on:

• Timber species and grade
• Door size and thickness
• Design: panels, carving, glazing
• Seasoning and treatment
• Finish: polish, lacquer, paint
• Frame type and section
• Hardware and fitting
• Order quantity

FAQs

Which wood is best for a main door in Lahore? It depends on budget and look. Harder, durable woods last longer outdoors. Ask suppliers for options and compare species, not just price.

Why do solid wood doors crack or warp? Usually due to unseasoned timber, unsealed edges or exposure to sun and rain. Buy seasoned wood and seal all faces.

Is a solid-core flush door the same as a solid wood door? Not quite. It has a solid timber core with faces, rather than visible solid panels. Ask exactly what the core is made of.

Can solid wood doors be used in bathrooms? They can, but moisture makes them swell. Seal every edge and ensure good ventilation, or consider moisture-resistant alternatives.

How long do solid wood doors take to make? It depends on quantity, design and the supplier's workload. Get a delivery date in writing.

Sources